The Mule Pull is designed and intended solely for the removal of standard fence posts and small shrubs with footings measuring less than 20 inches in diameter or width. It is not designed, rated, or approved for the removal of large trees, stumps, structural supports, utility poles, concrete footings exceeding 20 inches in diameter or width, or any load-bearing or structural components. Improper use may result in serious injury, property damage, or equipment failure.

By using this product, the user acknowledges and agrees to the following:

• Inspect the tool before each use. Do not use if damaged.
• Wear appropriate personal protective equipment (gloves & eye protection).
• Utilize the safety strap to secure the post to the unit before extracting.
• Ensure the post or shrub is free from attached wiring, fencing tension, underground utilities, or obstructions before pulling.
• Do not modify or alter the tool in any way.
• Do not operate the Mule Pull at air pressure exceeding 120 PSI. Exceeding this limit may result in equipment failure, serious injury, or property damage.
• Do not apply downward force to the fulcrum when releasing pressure. Allow the fulcrum and chain to lower under their own weight only. Applying additional force may cause damage to the jack and could result in equipment failure.
• Keep bystanders and children at a safe distance during operation.
• Use only on stable ground conditions.

The manufacturer and seller assume no responsibility for injury, loss, or damage resulting from misuse, modification, improper installation, or failure to follow safety guidelines.

Always check for underground utilities before digging or pulling posts by contacting your local utility marking service.